Stampe SV4 ARF R/C Scale Airplane

omp header600

You like Giant Scale Classic Biplanes?

We are proud to present our new Giant Scale Biplane Stampe SV4e:

The Stampe SV4 is a Belgian  two-seat biplane designed and built by Stampe et Vertongen. Only 35 aircraft were built before the company was closed during WW-II. After the war, Stampe et Renard built a further 65 aircraft between 1948 and 1955 as trainers for the Belgian Air Force. Licensed SV4C versions were built in France and Algeria, for a combined total of 940 aircraft.

Postwar SV4Cs were widely used by French military units as primary trainers. Many served with aero clubs in France, some of which were later sold to the UK and other countries. Some Stampe fitted with a Lycoming engine, perfectly restored and registered in Belgium as 00-KAT, is referred to as an SV4e.

You like more about the history? Go there….

stampe lightblue01s

The R/C Plane: This is the exact airplane we chose to model in a scale of 1: 2.8! Its cheek cowl design makes it a perfect match for a Roto FS 170 gasoline four stroke engine. The full-size original is still flying in Belgium today! Our giant-scale model Stampe SV4e will be the star of any airshow you attend! Fully aerobatic with Roto power, this realistically flying beauty will amaze spectators and fellow pilots alike!

stampe lightblue05ss stampe lightblue04ss

Construction: “Stampe SV4e ” is an ARF (Almost Ready to Fly) giant-scale airplane. Extremely precise CNCmachining and high-tech construction techniques are employed; only the very best quality balsa, plywood and other materials are used.

We always uses conventional “built-up” construction, no foam cores. The “Stampe SV4e ” is covered with painted Oratex. A complete set of accessories comes with the Stampe SV4e, including wheels, painted fiberglass cowling and fuel tank. In just a few hours, you can install the engine and RC equipment, then it’s off to the airfield for an exciting first flight!

stampe lightblue06sss stampe lightblue02ss
In Europe, there are many enthusiastic lovers of this unique aircraft. As a model aircraft is to be found only very rarely on the model airfields. Our ARF Stampe is the perfect Semiscale flying model.

Finish: Our first model was modeled after the in Belgium flying Stampe “OO-SVT”. The original machine is in Belgium and will be taken care and flown by Frank with the Feel the Sky team. The second finish is the stampe modeled after Tony Bianchi`s Stampe at the UK Classic Aviators Club. Tony is well known for his Blue Max Collection. Of course, the finish can be changed according to the customer’s request.


Scale: 1:2,8
Wingspan: 118″ (3,0 m)
Length: 91″ (2,31 m)
Recommended powerplant: Kolm BX155-V4 gasoline four stroke engine
Flying Weight: Approx. 44 Ibs (20 kg)
Construction Materials: Balsa, Plywood, Steel, Fiberglass Cowling, painted Oratex Covering

roto fs1704stroke s



Our basic painting version is the OO-SVT Stampe.

If you like other painting please ask us. Decide below your favorite painting version, tell us the flight ID!

Delivery time about 10 – 12 weeks, orders are welcome.

Prices and more information are available on request

 stampe lightblue03s


You like the Stampe and want your own finish? No problem, please tell us your desired finish, we will make you an offer (just tell flight ID)

Classic Stampe Originals SV4e, cheek cowling):

To entlarge click in image

Classic Stampe Original SV4`s, (Standard cowling):

To entlarge click in imageTo entlarge click in image

stampe overview02s


Here some nice detail images of our own Stampe:

Leave a Reply

Your email address will not be published. Required fields are marked *